o-o-o! Attention Lost! fans, before I forget…The Turn of the Scew!

If you are really into the American series Lost! on the ABC network, there’s an important event happening. Do you remember when they found the first hatch? Do you remember the orientation video? Of COURSE you do! Well, do you remember where desmond kept the video? It was behind a book called “The Turn of the Screw”. That book was held centered in shot just long enough for the viewer to see the title and read the author’s name: Henry James.

Henry James' The Turn of the Screw

Desmond said even said the title, just in case you don’t catch that the 1 second focused pause on the book cover was important:

JACK [to Locke]: Don’t tell me you believe this. This is crazy. You think that makes sense — pushing a button? You’re going to take his word for it?

LOCKE: His word is all we have, Jack.

DESMOND: You don’t have to take my word for it. Watch the film.

JACK: What?

DESMOND: The bookcase — top shelf, behind Turn of the Screw — projector’s in the pantry.

[Locke and Jack get the film. It says Orientation on the side of the film canister.]

COMMERCIAL BREAK

This novel was written in 1898, so it is public domain (at least until the Disney corp changes copyright laws AGAIN to protect their Mickey) and you can read it lots of places. This is important because J J Abrams has said that this single novel contains the complete explaination about what is happening on this island. Basicaly, it explains everything. (Sorry can’t find the source for that quote tonight. If you know it, please leave a comment. I’d like to quote him word for word here.)

I bring this to your attention because THIS SUNDAY at 1pm London time, BBC7 radio (online) is going to air “Turn of the Scew”. I am VERY eager to hear this broadcast. So I thought I would share.

This link will work for you Sunday afternoon:
http://www.bbc.co.uk/bbc7/listenagain/sunday/rams/1300.ram

Until then, clicking on it will give you the story One Flew Over the Cuckoo’s nest.

But I’m hoping this broadcast will give me some new insight.

And I just HAD to share!

Bible Study Resources

You may not know this, but for the last 10 weeks or so, I have been teaching the 75+ age bible study group at my church. It’s an interesting challenge to come up with material that they are not already intimately familiar with. As a result I spend between 8-14 hours in preparation each week for that Sunday’s lesson. I’ve fond that they don’t often speak up, even when prompted with easy questions. So it’s turned out to be more or less a 45 minute sermons.

I am THOROUGHLY enjoying myself and the responsiblity has brought a bit of structure into my normally hap-hazard life. So many many things have improved since I started doing this. I cannot begin to list them all and it probably isn’t entirely appropriate on a mostly technical resource related site.

But, several people have recently spoken to me what resources I use for my lessons, and it seems appropriate that I might share them here. All most all of my resources come from the Blue Letter Bible site. I’ve found this site has more features than most affordable bible software, and it is free. I will probably post recorded audio of my lessons here sometime, because I find some of the knowlege is already fading and if I don’t get my notes and thoughts down somewhere, I’ll lose them. And that is after all one of the main reasons this site is called The Code Cave. It’s not code, but I still need to put this stuff into cold storage before it melts away.

So, here is a quick tour of the links that I’ve used for a recent lesson:
I use the KJV as a base for my research, because it enables all of the blue letter buttons to the left of the text. Here take a look at 1 Corinthians 7:
http://www.blueletterbible.org/kjv/1Cr/1Cr007.html#top

This of course includes the references to the Greek (click the C), including phrase searches and tense notification
http://www.blueletterbible.org/cgi-bin/c.pl?book=1Cr&chapter=7&verse=1&version=KJV#1

From which you can click on the Strong’s number and see the original sense of the word and see all of its uses
http://www.blueletterbible.org/cgi-bin/words.pl?book=1Cr&chapter=7&verse=1&strongs=680&page=

You can see all of the versions side by side
http://www.blueletterbible.org/cgi-bin/versions.pl?book=1Cr&chapter=7&verse=1&version=KJV#1

You can get the sections (in some versions like the NKJV) in paragraph form
http://www.blueletterbible.org/cgi-bin/tools/printer-friendly.pl?book=1Cr&chapter=7&translation=nkjvp&x=6&y=8

Or in verse/table form (this is what I copy into Open office in order to put notes below each verse)
http://www.blueletterbible.org/cgi-bin/tools/printer-friendly.pl?version=nkjv&book=1Cr&chapter=007&navigated=yes

And there’s an audio link at well so that you can hear the whole bible that way.

I’ve not used the K button for a lesson, but the “Treasury of Scripture [K]nowledge” shows related verses.

I mostly use the verse form of the NKJV, the Greek references from the KJV and the [L]ist of commentaries.

Additional helpful links include:
J Vernon McGee’s 5 year audio program in zipped MP3’s
http://throughthebible.ca/zip/
and his notes he spoke from when making the shows:
http://thruthebible.ca/notes/index.htm

He is a good balance to David Guzik
http://www.enduringword.com/1cor_audio.htm
And his notes
http://www.enduringword.com/commentaries/46.html

Sometimes my lessons land somewhere between the two of them, but on some points, I think they both have missed minor points Paul was making.

Anyway, maybe you’ll find those links useful…

December Mod of the Month: How to make a USB extension cable.

I got tired of fighting the poorly designed slanted USB ports on the front of the Dell GX260 computers.

So, inspired by a friend’s similar project, I created this:
Completed USB extension cable

The process is really pretty simple. First you start with a standard USB cable. Mine was about 4 feet long.

Then you also need one of those USB to PS2 converters that you have laying around from any of the USB mice you’ve bought in the last 5 years. On my first experiment, I pealed all of the outside off. I don’t recommend doing it that way anymore.
Two different USB/PS2 converters

In making my second cable, I’ve found that the BEST way to do this mod is to slice it along the glue line on the side of the wrapper. With this second converter, I fond it even had a couple of plastic pins that will hold it together nicely. Here is the second adapter stripped. With the “wrapper” in-tact, I will be able to make the final product look much more professional using glue instead of tape. You can see the insert naked beside it.
Two different USB/PS2 converters

The next bit of the process is to cut off the plastic and the PS2 connector. Discard this part. Be very careful as you get the connector to this point. Hidden in the final part of plastic are four very tiny pins, plus one on the side. You can see the one on the side in the picture. If you break off any of these pins, you’ll be starting over again. You can probably manage if you break the side pin, but you’ll end up having a harder time fitting it back into the “wrapper”.
Here's the stripped connector.

Then you need to do some soldering. The order to connect the pins from cable to the connector is, from left to right, red, white, green, black. The ground connects to the outside of the connector. In my two test cases, the ground connector was on the left, but there’s no reason that this must be so. When you cut the end off of the USB cable, just slice it off a short ways from the device end of the cable. Carefully strip the rubber insulation from around the outside. Then unwrap the shield wires from the inner cables. Then twist it into a single wire.

Here is how the pins should be connected:
USB connector pin out.

Once you have the wires on, it should look like this….
A wired connector

At the end of the day, if you don’t have any shorts, you should have a fully working extension cable that allows devices to be recognized by windows upon insert:
A completed product

Mod complete!

RE:Help me keep a family out of a tent.

I was asked:

Good luck with this, but is this the right and fair way to solve this kind of problem? If the money is raised, one family gets a new home and others don’t. Surely $45000 could build a lot of inhabitable garages that could be used until people can do more for themselves.

I say this without knowing much about the situation, like why they don’t have access to insurance money, what kind of house you get for $45000, what kind of house they had before, what their income is now and what it was before the hurricane, what the FEMA is, what the FEMA is going to do with the trailer, how many other people are losing their trailers, how their current situation compares to others there, how much land they have, etc. Perhaps you can fill me in.

BTW, it wouldn’t be practical for me to contribute, having no access to credit cards or US banks. I’d have to pay many times that in Money Order fees.

To which I replied:

I think I can answer all of your questions Peter. It will just take some reading.

First of all, FEMA is the Federal Emergency Management agency. They provided, to the best of my knowledge, 31,400 travel trailers and 4,700 mobile homes as temporary living shelters in the wake of Hurricane Katrina. The trailers were provided free of charge for 18 months. In February 2007, that housing assistance will end and the trailers will in all likelihood be disposed of. They were always intended as temporary shelters and after being lived in for a year and a half, I suspect they have reached their safe life expectancy. The mobile homes (not the trailers) can be purchased by those occupying them. (http://www.clarionledger.com/apps/pbcs.dll/article?AID=/20061015/NEWS/610150388)

As of October 95% of those trailers were still occupied. With the need for housing, the price of residences has skyrocketed. (www.nlihc.org/press/101706pr.pdf)

I’ll admit I don’t know the exact Earl family income before Toby lost his fishing boat (well, not really lost – they can see it still up in a tree near them) and before the restaurant where Yvette worked was destroyed. However, the median household income was $31,224 in the year 2000 (http://www.city-data.com/city/Pearlington-Mississippi.html). Toby has since salvaged a flat boat which he can use to go out to reach a smaller number of traps. He’ll work to recover from there.

I also don’t know the specific value of their previous home. I can tell you that 6 years ago the median house value was $60,000 and most of the houses were between 20-30 years old. Right now there really is no median house value to speak of. The $45,000 for a new built house is not building them a luxury condo, but it will be safe, clean and livable. (http://www.city-data.com/housing/houses-Pearlington-Mississippi.html)

You are very correct in saying that a large number of heated enclosures could be built as a stop gap. However, I don’t believe that would be possible. It would not be allowed. One thing that everybody must remember, about the south, is that everything is about power. While it would logically make some sense to suspend zoning laws and some local building codes in this state of emergency, it will not be done. It would reduce the power of those in charge of such things. It would be declared that health concerns would prevent building structures that do not meet code, but there would be other reasons at play. Never mind that the daily low of 40 degree (F) and average daily temp of 50 has an effect on health. People garner power in the south and hold onto it with a death grip. Sometimes that literally involves death.

On one of her trips to Pearlington, Angela delivered supplies and donations from churches up north. A local pastor, Rev. Fred Fields of the Mount Zion AME Church, had agreed for the supplies to be unloaded. However there was a problem. Rev. Fields was also on the pay of the local distribution center – center that had grown a reputation for “mis-allocation” of supplies. It appears that when he reported to the distribution board the size of the donations and they realized the Angela’s actions were reaching a disturbing level compared with what the distribution center was achieving, he refused to let any more donations be delivered to the people of Pearlington from church property. Getting all of this second hand, I can’t be certain of Rev. Fields full motivation, but the end action is that he refused to assist in delivering goods and made a play to funnel all of that material through an operation for which he was on the payroll. The end result was that a neighbor opened up their private property and legal distribution of goods continued 50′ away from the original location. BTW that neighbor was the wife of the pastor that founded the AME church. This wasn’t a church matter. (http://www.pearlingtonproject.org/update3.htm)

So, in short, http://www.pearlingtonproject.org/ – the Pearlington Project is a group of people I am familiar with and that is outside of the corrupt influence of the local southern governmental association. (NOTE THIS IS THE .ORG SITE, I know little about the group running the .com site beyond it being a group of doctors from Colorado) There are many places in which people can make donations to general funds. I’m quite certain that if you were one who wished to help, you could make donations to the Red Cross and other foundations in amounts of $50, $100, $1000, or more compared to which money order fees would be negligible. And when that amount is spread amongst the 35,000 households in need of permanent shelter, it will help some.

My wife and I have chosen to take a different approach. The Pearlington project is working to build houses in general. As many as possible, one at a time. The houses will be prebuilt up north, shipped in pieces to Pearlington and assembled. The $45,000 covers not only all zoning permits, building materials, labor costs and supplies, carpets and internal fixtures for each house. Donations to the general Pearlington project will be spread amongst those efforts. My wife selected the Earl family as a specific target, a way to put distinct faces before those who might not have donated to a general fund. I think that is a very good idea and have taken up the cause. Our goal of reaching $45,000 is difficult, but it just might be achievable.

I certainly do encourage you to donate to a general fund if you think it is a better way for your money to be spent. I look forward to hearing about it. However, I think I can raise more funds through giving people a target goal and some faces to go with it. Additionally, if I can show those that donated, a family moving into a house, maybe people will enjoy the feeling of being a part of that. They will see exactly what their monies helped achieve and maybe – just maybe – we can move on to the next house, and the next one after that – hopefully with your help.

Bloggers Build a House

Allow me to introduce you to the Earl Family: Toby, Yvette, Brittany, and Michael. (Toby was not available for this photo.)

Nearly a year and a half ago, they lost their home when Hurricane Katrina hit the small town of Pearlington, MS. That trailer is where they’ve been living of late. That’s about to change.

For a couple years now, my wife and I (I mostly helped by providing tech support and online resources) have been working to help the residents of Pearlington, MS through her blog, and her Purls of Hope website. She’s been doing this to support the Pearlington Project Katrina Foundation, which was started by Angela Cole, shortly after Katrina hit. I’ve referred you to that site before; referencing some of the roadblocks faced by those that only one to help people in need.

For this project, I’m taking my help a step further because the need is great.
Continue reading Bloggers Build a House

Steelers QB Ben Roethlisberger was involved in a motorcycle accident around 11:30am

Living in Browns’ country every browns fan has come up to me with a half grin on their face asking if I’ve heard the news…
Of course that was before the exact details came out…

The Pittsburgh Tribune Review* is reporting: “Roethlisberger lost most of his teeth, fractured his left sinus cavity bone, suffered a nine-inch laceration to the back of his head and a broken jaw, and severely injured both of his knees when he hit the ground, police said. A plastic surgeon has been summoned.”

UPDATE: BTW, I read on a sports forum that had linked to my post, that another Steeler had reported that the surgery was specifically for the broken jaw and was expected to heal enough for him to play early in the season. The Steeler was un-named. So take that for what it is worth.

From KDKA:
“Witnesses tell KDKA he was not wearing a helmet and appeared to have head and facial injuries.”

From me:
PA is NOT the state to be riding in without a helmet. The road conditions (repair + gravel) not to mention the curves and hills just add too many variables. That’s even before you start thinking about the cars pulling out in front of you… Nebraska, that’s a different story. Plus no helmet on the 10th street bridge??? That’s just plain stupid. The buses in Pittsburgh deliberately (almost) try to take out motorcylclists. They assume you don’t need the whole lane and that they can take the right hand turns wide and swing their tails into the next lane over. The DO NOT do that when there are cars there or they would take out the passenger side door and window.

And can you imagine the poor people from Maine that go on vacation and take out the QB that won the last superbowl???

Predictions:
The lid law in PA will come under intense scrutiny but remain as is.
Riders in the NFL and other professional sports will come under an intense scrutiny (AKA the Cleveland Brown’s Kellen Winslow times 10) and some bylaw will be passed preventing riding without a helmet.
That law will provoke do gooders accross the country to revisit state helmet law legislation. Should be a fun year.

More from KDKA PITTSBURGH: Pittsburgh Steelers Quarterback Ben Roethlisberger is
Continue reading Steelers QB Ben Roethlisberger was involved in a motorcycle accident around 11:30am

Google Cache links use checksum of the first 8 characters in the earl

I was looking to see what people were looking for as they reached my blog searching for “KCYap Wife” when I noticed something interesting.

This:
http://72.14.203.104/search?q=cache:CT71ZmX0u3UJ:kcyap.com/wordpress-16-theme-design-competition/how-to-participate/%3Fp%3D126+kcyap+wife&hl=en&gl=us&ct=clnk&cd=4

truncates back to this:
http://72.14.203.104/search?q=cache:CT71ZmX0u3UJ:kcyap.co

without any changes to the output. That means that all of the rest of that stuff is just Garbage. I’m not quite sure why that’s important. I think Google must use that as a check sum in there. It’s definately not a Rot13 or md5 or anything like that. So I think it is a 2 hex char checksum. I’m not sure what use it would be even if someone cracked the cache indexing key. But it’s interesting none the less… in a Code Cave sort of way…

I need an Maxthon alpha tester or two…

I need a Maxthon user (and if you are not one you should be – it is an alterenative browser based around IE) to test a new browser plug in.

The newest version of the Google tool bar does not work in Maxthon. I use search Site ALL the times and search images ALMOST as much. Without those two items in Maxthon, it is missing some major features.

So, I’ve written a toll bar that will take the text in the search field and use it to do those extra searches that the Google Tool bar does. It even EXTENDS the google functionality because it will search the news page for info you type in there.

So, this is it at a barely functional level. Please try it and tell me if you come up with any flaws major or minor. I already have in the about box a list of 8 or 9 things I want to do before it reaches a beta level. Any feedback would be appreciated.

Thanks…

Here is the Zip: http://www.thecodecave.com/downloads/GoggleAlpha1.zip
Just extract it with paths to the Maxthon directory, the built in paths will put it where it belongs. Then just open a webpage in Maxthon and the tool bar will appear. (you have to be at a page for the tool bar to appear, if you’ve chosen not to have any page open on startup, the toolbar will appear when you open a page.

Here’s my recommended Gogglebar positioning:
Alpha 1

ADDENDUM:

So if you have a web page open and look for Goggle in the toolbar menu it is not there? Well, for the same reason it requires a page to be open, it likewise requires the Goggle DLL to be registered. You should be able to do clicking Start>Run and pasting in a modified version of this:
regsvr32 “c:\program files\Maxthon\Plugin\Goggle\Goggle.dll”
That will of course have to point to the right director for Maxthon…

See unfortunately this is an IE plugin that works in Maxthon. Ideally, the IE dependency will be removed but i’m not sure how to do that ATM. That may not be fixible befor a beta release, but it is not a big deal if it comes with an installer…

What is this Category?

What is this Category?

The WordPress-list-heirarchical-categories feature has a bug that means that parent categories must have at least one post or the categories underneath won’t be displayed.  SOOOOO….. Here’s the obligatory post for this category…

Here I will write about stuff I want to do – and maybe I’ll add a category specifically for stuff I’ve said I’ll do…